Numerical investigation of flow mechanisms of tandem impeller inside a centrifugal compressor

This study numerically investigated a single stage centrifugal compressor ‘‘Radiver’’ with a wedge diffuser and several tandem-designed impellers to explore the flow phenomena within the tandem impeller and the potential to enhance compressor performance. The results demonstrate that tandem design and clocking fraction (λ_s) significantly affects the compressor performance. The compressor stage with tandem impellers of Series A of boundary layer growth interruption alone are observed to have a widely operating range but efficiency and total pressure ratio penalty compared with that of conventional impeller. The tandem impeller with at least the same impeller efficiency as the conventional design is considered as a critical design criteria so that further modification process based on the flow characteristic of tandem impeller is necessary. In order to restrain the inducer wake and exducer shock losses, parameters modification of blade angle and thickness distributions are necessary and the modified tandem impeller of Series B is obtained. The modified tandem impeller with 25% clocking arrangement shows an 8.45% stall margin increase and maintains the total pressure ratio and efficiency as the conventional design, which proves the potential of tandem impeller to improve compressor stage performance. It is noteworthy that the tandem impellers of Radiver have not shown obviously balanced exit flow field and the fundamental mechanism of stall margin extending of tandem impeller lies on the improved impeller/diffuser matching performance resulting from the incidence angle variation at diffuser inlet.     

基于CH自由基发光的旋流火焰放热率时空特性研究

对不同工况下CH4/air旋流火焰的放热率在时间上的热声振荡现象和空间的三维形态转变两方面进行了研究。在燃烧形态转变方面，由于旋流火焰的复杂流场分布特性，采用基于化学自发光的三维计算层析技术(3D-CTC)，测量了雷诺数从5 000到20 000的三个工况下旋流燃烧的CH*发光三维火焰结构。以此表征放热率的三维分布，实现对旋流火焰放热空间形态的测量。该诊断方法通过对旋流火焰发光在8个视角下的二维成像，结合层析重建算法得到其三维CH*分布信息。为验证重建保真度，将重建后结果二维可视化与高速摄影下的二维时均结果进行对比，结果表明重建误差在5%以内。研究中，分析了不同雷诺数下放热率的空间变化规律，结果显示所有实验工况下放热率的垂直于喷嘴方向的变化程度比沿喷嘴轴向的要剧烈；而随着雷诺数增加，最大的放热区表现出了明显的向后推进趋势。在旋流燃烧的热声振荡方面，利用CH*的二维高速摄影，对旋流燃烧的放热率不稳定性进行研究，发现放热率的振荡频率随着雷诺数的增大逐渐增加。      

Which way is the bookstore? A closer look at the judgments of relative directions task

We present a detailed analysis of a widely used assay in human spatial cognition, the judgments of relative direction (JRD) task. We conducted three experiments involving virtual navigation interspersed with the JRD task, and included confidence judgments and map drawing as additional metrics. We also present a technique for assessing the similarity of the cognitive representations underlying performance on the JRD and map-drawing tasks. Our results support the construct validity of the JRD task and its connection to allocentric representation. Additionally, we found that chance performance on the JRD task depends on the distribution of the angles of participants’ responses, rather than being constant and 90 degrees. Accordingly, we present a method for better determining chance performance.     

火星轨道交会自主导航与制导方法

对火星采样返回任务中的火星轨道交会自主导航和制导技术进行了研究。采用光学自主导航敏感器测量的火星中心方向和视半径，相对敏感器测量的相对位置等观测量，设计了导航滤波器同时估计轨返组合体和上升器的轨道。在导航滤波器设计中，针对光学自主导航敏感器更新频率远低于滤波解算频率的问题，设计了一种连续观测量构造算法，确保每个滤波周期均可进行测量更新，以提高导航精度。基于导航滤波器估计结果，采用T-H制导设计了4脉冲共椭圆交会策略实施轨道控制，从而构成近程交会自主导航和制导方案用于完成火星轨道交会任务。通过数学仿真校验了所提出方法的有效性。     

HB-2 high-velocity correlation model at high angles of attack in supersonic wind tunnel tests

Responding to a need for experimental data on a standard wind tunnel model at high angles of attack in the supersonic speed range, and in the absence of suitable reference data, a series of tests of two HB-2 standard models of different sizes was performed in the T-38 trisonic wind tunnel of Vojnotehnickˇi Institut(VTI), in the Mach number range 1.5–4.0, at angles of attack up to+30°. Tests were performed at relatively high Reynolds numbers of 2.2 millions to 4.5 millions(based on model forebody diameter). Results were compared with available low angle of attack data from other facilities, and, as a good agreement was found, it was assumed that, by implication, the obtained high angle of attack results were valid as well. Therefore, the results can be used as a reference database for the HB-2 model at high angles of attack in the supersonic speed range, which was not available before. The results are presented in comparison with available reference data, but also contain data for some Mach numbers not given in other publications.     

基于CMPSO算法的永磁同步电机转动惯量识别研究

永磁同步电机(PMSM)是一种具有很强非线性的动态系统,在工业驱动应用中发挥着重要作用。实时辨识转动惯量对于高精度PMSM系统控制和稳定性状态监测具有重要意义,但传统转动惯量识别方法精度较低。在传统离散模型参考自适应理论基础之上,用柯西变异粒子群优化(CMPSO)算法代替待辨识参数自适律设计环节,以实现PMSM转动惯量识别。该转动惯量辨识方法充分利用了CMPSO算法的快速高效收敛性,仿真结果和试验结果表明了可行性、正确性和准确性。     

基于任务的微机电惯性系统规模化测试技术研究

针对传统惯性测试技术测试周期长、测试效率低、测试成本高等问题，提出了基于任务的微机电惯性系统规模化测试解决方案。研究分析了微机电惯性系统测试技术的研究现状和发展趋势，建立了基于任务的微机电惯性系统测试体系，详细论证了微机电惯性系统批量、并行、自动化测试解决方案的可行性，为微机电惯性系统规模化测试实践奠定了基础。     

基于全过程移动监督技术的感应电机定子绕组温度实时监测系统

随着物联网技术的发展,如何将物联网技术与非侵入式电力设备运行状态监测技术相结合成为当前研究热点之一。为了探索基于物联网技术的电气设备运行状态监测新模式,以感应电机定子绕组温度的非侵入式在线监测为出发点,首先提出了一种基于自适应法和最小二乘法的电机定子绕组温度辨识方法,并结合当前物联网技术的发展,设计了一种基于全过程监督技术的感应电机全寿命周期监督定子温度监测系统。以1台5.5 kW感应电机为例进行试验验证,结果表明该系统具有较强的鲁棒性。所提出的理念和技术可以为其他大型电力设备的状态监测提供重要参考和技术支撑。     

基于单应性矩阵的模型迎角单目视频测量方法

风洞试验中模型迎角的精准测量是降低阻力系数误差的重要途径之一，为此，提出了基于单应性矩阵的模型迎角单目视频测量方法。该方法通过两个单应性矩阵，获取试验过程中相机实时位姿和标记点物方空间位置坐标，应用坐标旋转关系，完成试验模型的迎角测量。数值仿真试验结果表明：迎角测量误差与待测标记点到风洞壁板间的距离偏差近似为线性关系，因此，当标记点不满足共面条件时，可根据该特点进行测量误差修正。静态标定和风洞迎角测量试验结果表明：修正系统误差后，迎角实测数据的测量准度在0.01°以内，精度不超过0.012°。本文方法易于实施，工程实用价值强。     

基于PTE的多雷达航迹融合算法

针对杂波背景下的多雷达航迹融合时局部估计误差互协方差矩阵未知的问题，提出基于目标存在概率（PTE）的航迹融合算法，提升了正确航迹率和跟踪精度。首先，通过综合概率数据关联得到单接收站的目标航迹估计集合和对应的目标存在概率。然后，在局部估计误差互协方差矩阵未知的条件下，基于PTE信息提出不带记忆的综合广义凸组合航迹融合算法。进而将前一帧的融合状态进行反馈，提出带记忆的综合广义凸组合航迹融合算法。仿真验证了所提算法的有效性。